Hitch Expo

Trailer Hitch , 7-Way , Tekonsha Voyager Brake Control
Trailer Hitch , 7-Way , Tekonsha Voyager Brake Control
Trailer Hitch , 7-Way , Tekonsha Voyager Brake Control
Trailer Hitch , 7-Way , Tekonsha Voyager Brake Control
Trailer Hitch , 7-Way , Tekonsha Voyager Brake Control

Draw-Tite Trailer Hitch + 7-Way Wiring + Tekonsha Voyager Brake Control For 97-05 Chevy Venture Oldsmobile Silhouette Pontiac Trans Sport Montana DR98CE

$615.39

Includes Everything Pictured:
Class 3 Trailer Hitch, 2 Inch Square Receiver, Black
T-One® T-Connector Custom Harness, 4-Way Flat, w/Converter
Wiring Adapter, 7-Way Flat to 4-Way Flat
Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only
Circuit Breaker, 30 Amp
Voyager® Proportional Brake Controller for Trailers with 1-4 Axles, Black
Trailer Brake Controller Harness, Universal Fit
Installation Hardware (if required)
Installation Instructions (if required)
Installation Schematics & Diagrams (if required)

This Trailer Hitch Fits The Following Vehicles:

  • 1997 - 2005 Chevrolet Venture All Models
  • 1999 - 2005 Pontiac Montana All Models
  • 1997 - 2004 Oldsmobile Silhouette All Models
  • 1997 - 1999 Pontiac Trans Sport All Models

DRAW-TITE 75278 Class 3 Trailer Hitch, 2 Inch Square Receiver, Black (QTY 1)

Manufactured by: Draw-Tite

DRAW-TITE® Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go This DRAW-TITE Class 3 receiver hitch is rated for up to 3,500 lbs gross trailer weight (GTW) and up to 350 lbs.

tongue weight (TW) They are also suitable for use with weight distribution up to 5,000 lbs weight distribution (WD) and 500 lbs.

weight distribution tongue weight (WDTW) DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer.

Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..

T-One Tow Harness Connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harnessWeatherproof, one-piece construction and a 'Factory' appearance - T-One Connectors look like part of the factory harness and simply store in the cargo area or under the rear bumper when not in use16 gauge bonded wire with 4-flat plug and cap; 2.1 amp stop light/turn signal circuit capacity; 5 amp taillight circuit capacity; lighting converterSimple, easy to follow, do-it-yourself instructions included in every package; no special tools required for installation (QTY 1)

Manufactured by: Tekonsha

Connections are important, be it with your traveling companions or the truck and trailer in which you’re riding Thankfully, Tekonsha® has everything you need for the perfect connection, no matter your set up For more than 55 years, Tekonsha has been the leader in T-One Connectors, utilizing advanced engineering and development to design products that allow you the freedom to travel with nearly any vehicle and trailer combination.

Tekonsha’s dedication to creating the highest performing trailering electrical components with the broadest coverage ensures your connections are safe and secure So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide Life is a Journey.

Stop Often.

Features:

  • 16-gauge bonded wire harness with plug-and-play 4-way flat connector
  • Stop/turn circuit capacity: 2.1 amps
  • Running/taillight circuit capacity: 5 amps
  • Solid, weatherproof, one-piece construction
  • No cutting, splicing, or taping of vehicle wires
  • Includes converter where needed
  • Circuit-protected design
  • Male-to-female harness configuration
  • Four-wire system (brown, green, yellow, white)

REESE TOWPOWER 85343 Wiring Adapter, 7-Way Flat to 4-Way Flat (QTY 1)

Manufactured by: Reese Towpower

REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector..

TOW READY 20506 Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only (QTY 1)

Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls No other parts are necessary..

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.(QTY 1)

Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection Non-corrosive molded cover eliminates grounding when operating against a fault line.

Includes mounting bracket and installed nuts and washers..

Features:

  • Current rating: 30 Amp
  • Number of terminals: 2
  • Voltage compatibility: 6 V, 12 V, 24 V
  • Terminal type: Threaded
  • Terminal gender: Male

TEKONSHA 9030 Voyager® Proportional Brake Controller for Trailers with 1-4 Axles, Black (QTY 1)

Manufactured by: Tekonsha

The Tekonsha Voyager electric brake controller provides secure trailer braking when you need it most As a tried-and-true proportional brake controller, the Voyager utilizes patented braking sensor technology and advanced electronics to provide a smooth braking response in any stopping situation Its bi-colored LED brake indicator assures a complete connection between your vehicle and trailer, with the color changing gradually from green, which notes a completed circuit, to red to indicate relative braking power.

This versatile controller has a compact design, a conveniently located power control knob to adjust settings, and a simple level knob for easy leveling during installation Plus, the Voyager has a Plug & Play feature that allows for quick and easy connection with your vehicle’s wiring The Tekonsha Voyager trailer brake controller works with 1-4 axle trailers, comes with all the mounting hardware needed for installation, and is backed by a five-year limited warranty..

Product Dimensions ‏ : ‎ 3 x 2.25 x 5.5 inches; 2.4 ouncesItem model number ‏ : ‎ 20127 DescriptionReplacement Part-Brake ControlReplacement Part; Universal 12in. Brake Control Plug for #5520 (Activator III); #20185 (Intella-Stop Ultra); #20188 (Intella Stop Digital); #39515 (Primus); #39519 (Prodigy); #39526 (P3); #83520 (Brakeman Ultra)Universal 12 in. Brake Control PlugReplacement Part-Brake ControlBrake Control Wiring (QTY 1)

Manufactured by: Tow Ready

Trailer Brake Controller Harness, Universal Fit.

Features:

  • Universal fit design for trailer brake controllers
  • Clamshell packaging for secure, tamper-resistant display

List of Fitment Years:

2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997
Hitches Near Me: We operate out of several warehouses across the country, ensuring faster delivery to your location.

Order today or message us for more information